CAMERAS
MINIATURE PINHOLE BOARD CAMERA
No. 94460 Miniature board camera w/flying leads
No. 94461 Miniature board camera wired with Video Connector & Power Supply
No. 94462 Wired for body worn applications with special 6 ft. video power cable. 8 AA battery pack (holder included, batteries extra)
No. 94463Plastic case with brackets to help protect camera
Can be concealed anywhere and requires only 1/16" opening to view the target. 1/3" CCD, 380 TV-lines, AGC, minimum 0.5 lux or less, DC 12V power consumption: 125 mA, 3.7 mm lens, F2 AutoIris (1/50 - 1/000.000 sec.). ONLY 1.6" x 1.6" x 0.49" size.Provides a 9ft. high x 12 ft wide picture at 10 feet. Its excellent low light capabilities and IR sensitivity will make this a staple in your investigative arsenal.
Watec 201A MINIATURE COLOR CAMERA
No. 93201 WAT - 201A
No. 91022 AC Power Supply
No. 94022 12 Volt Car Cord
Color 1/2" A Class CCD image sensor 280K pixels. Horizontal resolution of 350 TV lines. Minimum illumination: 2 lux at f1.2 Standard CS Mount C mount adapter WAT-CSCC. Optional Auto iris. Auto White Balance. AGC On/Off selection switch. AGC Gain Switch (Normal/High Gain).Ambient operating temperature range: 10 degrees ~ +45 degrees Celsius (+14 degrees ~+110 degrees Fahrenheit). Dimensions: 44mm x 44mm x 53mm (1.7" x 1.73" x 2.08")
Watec 202B MINI COLOR CAMERA
No. 93202 WAT-202B
No. 91022 AC Power Supply
No. 94022 12 Volt Car Cord
Color 1/3" CCD pick up element with 380K pixels. Horizontal resolution of 420 TV lines. Minimum illumination: 2 lux at f1.2. CS Lens Mount with C mount adapter WAT-CSCC (optional). Auto iris output with backlight compensation (standard). Two step White Balance: Daylight or Lamp with manual adjustment.Ambient operating temperature range:-10deg~+40deg.C (+14deg~+104deg.F).Dimensions: 42mm x 42mm x 53mm (1.65" x 1.65" x 2.08")
DIGITAL COLOR CAMERA
No. 99412 Digital Color CCD
1/3" Interline transfer CCD with 380K pixels, with a microlens on each pixel. Horizontal resolution of 480 TV lines. Signal to noise ratio of 50dB.Features BLC (black light compensation) and ATW (auto tracing white balance) functions.3 lux at f1.4 - requires only 0.09 foot-candles when used with A spherical High Speed Lens. AGC (automatic gain control) circuit for clear images in low light conditions.Advanced ELC (electronic light control) and VD (vertical drive) lock over single coax cable when used with optional Multiples Unit.Accepts either C or CS lenses, as well as both DC and video voltage for ALC servo lenses.
Watec 660-37 PINHOLE BOARD CAMERA
No. 96607 WAT 660-37
No. 96608 WAT 660-37 Wired for Body Wear
Black & White, 1/4" A Class CCD image sensor, 280K pixels. Horizontal resolution of 380 TV lines.Minimum illumination: 0.5 lux at f1.2 (with 3.7mm Flat pinhole lens). Auto electronic iris 1/60 ~ 1/10,000 (iris control function) Operating temperature range: -200~+400C (+170~+1040F).Power Requirements: 9V DC +/-5% (100mA)Dimension: 29mm x 29mm x 13mm (1.16" x 1.16" x 0.51")
Watec 902A BLACK & WHITE 1/2" CAMERA
No. 91902 WAT902A
1/2" CCD pick up element. 250K pixels. Horizontal resolution of 450 TV lines. Minimum illumination: 0.05 lux at f11.4 CS Lens Mount with C mount adapter WAT-CSCB (optional). Three position Auto electronic iris (Normal ~ 1/10.000. off, FLICKERLESS). Two position Gamma switch: AGC ON/OFF.Operating temperature range: -20deg.~+40deg.C (+17deg.~+104deg.F).
Dimension: 34mm x 34mm 46mm (1.33" x 1.33" x 1.80")
Power Requirement: 12V DC +/-5% (125mA)